-19-
Operation 4
• Keep fire and spark away when handling fuel.
• Always stop the engine before refueling.
• Do not overfill fuel so that fuel will not overflow. Check fuel gauge when filling.
In case fuel is spilt, wipe out immediately.
Pre-start up Inspection
Preparation
Always perform an inspection before use.
Refer to
Maintenance Schedule
(page 33) for the inspection schedule and procedure.
Checking and Filling Fuel
1. Insert key into main switch.
2. Turn main switch to [ | (on)] position and
wait a few seconds.
3. Check fuel gauge.
4. Turn main switch to [ (off)] position and
remove key.
To Next Page
Loading...