• Park the transporter (truck) on a level ground and apply parking brake. Always
use chocks to secure wheels.
• Do not allow bystandars to come close to the machine or the transporter when
loading or unloading the machine.
• Use only the loading ramps with sufficient strength (to withstand the combined
weight of the machine and the operator), width (more than 1.2 times the width
of the track), and length (more than 4 times the height of the loading deck of the
transporter), and have anti-slip ramp surfaces.
• Secure the hooks of the loading ramps firmly and flush with the loading deck.
• Move slowly backward when loading onto, and move slowly forward when
unloading off of the transporter. Pay special care when going over the joint
between the loading deck and the ramps; the machine may tip.
• Do not turn on the loading ramps. The machine may fall.
• Tie down the machine securely. Make sure the machine does not move around
on the loading deck.
Hauling
Loading and Unloading
Loading to the Transporter
1. Park the transporter and apply parking brake. Secure the wheels with chocks.
2. Place the loading ramps. Secure the hooks of the ramps firmly and flush with the
loading deck.
To Next Page
Loading...