CanyCom S25A - Fuel System

To Next Page

To Previous Page

Maintenance

-48-

Fuel System

1. Open engine hood.

2. Using oil filter wrench, remove fuel filter

cartridge.

• Fuel is highly flammable. Keep fire and spark away when servicing fuel filter. If

fuel is spilt, wipe immediately.

3670M-0504-100E

Fuel Filter

Changing Fuel Filter

• Dispose risidual fuel in fuel filter or drained fuel or water properly. Check the

national and local regulation for discarding such fluids.

3670M-0504-110E

Oil Seal

3. Apply thin coat of new fuel on oil seal.

4. Install fuel filter. Tighten fully by hand.

• Do not use oil filter wrench when installing

fuel filter.

NOTE

5. After installation, bleed air in the fuel system.

6. Close engine hood.