• Always unload the machine before hoisting.
Hoisting and Towing
1. Raise the load deck body and lock it with the
load deck body safety prop. (Page 32)
2. Hitch the wire rope to the lifting hooks (3
places) attached to the frame and lift the
machine. At this time, adjust the wire rope
length so that the machine will be horizontal.
3. Slinging work implements (wire rope, chain,
etc.) to be used should have sufficient
strength.
• Hoisting requires qualifications. Check with your local authority for necessary
qualifications and licenses for hoisting.
• Use hoisting sling of sufficient strength. Always use the slings of the same
length when more than one is used.
Hoisting
To Next Page
Loading...