3. Set the H/L Speed Selecter switch to [ (LO)] mode and drive the machine slowly
forward onto the loading deck.
4. Park the machine according to the instructions in
"Parking"
(Page 29).
5. Tie the machine at lift hooks with rope or tie-down belts and secure it onto the loading
deck of the transporter securely.
Unloading from the Transporter
1. Park the transporter and apply parking brake. Secure the wheels with chocks.
2. Undo rope or tie-downs that secure the machine.
3. Place the loading ramps. Secure the hooks of the amps firmly and flush with the loading
deck.
4. Set the H/L Speed Selector switch to [ (LO)] mode and drive the machine slowly
backward from the loading deck to the ground.
To Next Page
Loading...