CanyCom S25A - Page 76

-67-
Troubleshooting
6
Area Malfunction Possible Cause Corrective Measure Ref.
Brake
Brake does not work
well.
Problem in hydraulic
system.
→See below
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Hydraulic
System
Hydraulic components
(hydraulic motor,
cylinder) does not
work properly.
Insufficient or
deteriorated hydraulic
oil.
→Fill or change oil. Page 42
Hydraulic oil is
contaminated
→Change oil. Page 42
Oil filter is clogged. →Change filter. Page 47
Oil leaks →Repair leak.
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Chassis
Track does not move
smoothly.
Not properly adjusted. →Adjust. Page 50
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Machine does not
travel straight.
Roller, upper roller,
idler or sprocket is
broken.
→Repair or replace.
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Dump
Vessel
Related
Tailgate does not open
or close properly.
Not properly adjusted. →Adjust.
Foreign object is stuck
in the gate.
→Remove the foreign
object.
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Safety
Devices
Lamp does not light.
Blown bulb. →Replace.
Blown fuse. →Replace.
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Lamp does not light.
Blown fuse. →Replace. Page 61
Other (other than the
above).
→Please contact
your CANYCOM
representative.