Cardinal 200 User Manual

8200-M035-O1 Rev C  200 Installation & Technical
1
SPECIFICATIONS
Power Requirements:
90 to 264 VAC 50/60 Hz 15 VDC 1A plug-in UL/CSA listed AC power
adapter (Cardinal part number 6800-1035).
Enclosure Type:
Aluminum, NEMA 12/IP52
Enclosure Size:
5.32" W x 2.62" H x 9.13" D
(135 mm W x 66.6 mm H x 232 mm D)
Weight:
8.2lbs
Operating Environment:
Temperature: 14 to 104 ºF (-10 to +40 ºC)
Humidity: 90% non-condensing (maximum)
Display:
6-digit, 0.6" high, 7-segment LED
Transducer Excitation:
12 VDC
Signal Input Range:
1.0 mV min. to 40 mV max. (with dead load boost)
Number of Load Cells:
8 each, 350 OHM minimum resistance
Load Cell Cable Length:
1500 feet maximum. Consult factory for other requirements
30 feet maximum without sense lines
Division Value:
1, 2, or 5 x 10, 1, 0.1, 0.01, 0.001 commercial
0 to 99, non-commercial
Sensitivity:
NON-COMMERCIAL
NTEP
CANADA
OIML
0.15 uV/e
0.3uV/e (Class III/IIIL)
0.3uV/e (Class III/IIIHD)
0.7 uV/e (Class III)
Scale Divisions:
NON-COMMERCIAL
NTEP
CANADA
OIML
100 to 240,000
100 to 10,000 (Class III/IIIL)
100 to 10,000 (Class III/IIIHD)
100 to 10,000 (Class III)
Internal Resolution:
1 part in 16,777,216
Tare Capacity:
Scale Capacity
Sample Rate:
1 to 100 samples per second, selectable
Auto Zero Range:
0.5 or 1 through 9 divisions
Weighing Units:
Tons, Pounds, Pounds-Ounces, Ounces,
Metric Tons, Kilograms, Grams
Keypad:
Color coded Membrane type - 7 keys
Standard I/O:
(1) bi-directional RS232 (20mA)
(1) output only RS232 (20mA)

Cardinal 200 Specifications

General

Brand	Cardinal
Model	200
Category	Accessories
Language	English