8527-0544-2M Rev G APS Enterprise Scale 15
ERROR AND STATUS DISPLAYS
Display Meaning
-Err-
Displayed when the ZERO key is pressed and the scale could not zero.
----
Displayed when scale weight exceeds scale capacity, or if there is an
analog high/low error.
CARE AND CLEANING
NOTE: The APS Enterprise scale contains no user-serviceable parts and
maintenance should be limited to an occasional cleaning as required.
Do not submerge the scale in water, pour or spray water directly on it to clean. The
scale is not waterproof and covering it with water will damage it and void the warranty.
Always remove power before cleaning.
Do not use wire brushes, abrasives, or cleaning tools such as steel pads and
scrapers, which will scratch the surface. Instead, use soft cloths or plastic scouring
pads for cleaning.
When possible use treated water. Hard water can leave behind deposits. Soft water
is much gentler on the stainless steel and painted surfaces.
Avoid the use of acetone, thinner or other volatile solvents and abrasive type cleaners
for cleaning. If required, a mild solvent such as mineral spirits can be used to remove
oil, grease, tars, wax, and similar substances. Use a cloth dampened with mineral
spirits and only apply to areas that are contaminated. Follow up the use of this mild
solvent with detergent cleaning and rinsing.
To Next Page
Loading...
Need help?
General