Carel UU02 - User Interface (Master Panel); Graphic Terminal; Keypad; Display

21
ENG
“humiSonic ventilation” +0300063EN - rel. 1.0 - 16.02.2016
5. USER INTERFACE “MASTER” PANEL
5.1 Graphic terminal
The built-in terminal on the “Master” electrical panel comprises the
display and the keypad, featuring 6 buttons, which are used to perform
all the confi guration and programming operations on humiSonic.
5.2 Keypad
0N
'RI
0/
0''
1RODUCTION,GH
Fig. 5.a
BUTTON DESCRIPTION
Alarm
• Display the list of active alarms
• Reset alarms with manual reset
Prg
Access to the main menu
Esc
Return to the previous screen
/
Up / Down
• Scroll between screens
• Increase / decrease the value
Enter
• Switch from display mode to setting mode
• Confi rm the value and move to the next parameter
Tab. 5.a
5.3 Display
During normal operation, the display shows, as well as the current
date and time, the type of control selected, the reading of the control
probe and limit probe (if featured), and the quantity of atomised water
produced.
1
29/05/2015 Fri 12:30
7 8
On
ON
OFF
3
9
Unit Offline
2
Production 0.5Kg/h
5
99.2rH%
6
4
10
Fig. 5.b
Key
1 Current date/time 6 Limit humidity probe reading
2
Cause of unit shutdown/Unit
status
7 Unit status icon/active actuators
3 Request 8 Quick access button menu icon
4 Control type selected 9 Maintenance required
5 Unit status 10 Time bands enabled
CAUSE OF UNIT SHUTDOWN
Message Description
Off by Key Off from keypad
Unit Offl ine Unit offl ine
Remote On/Off Remote On/Off
No request No request
Unit disabled Unit disabled
Alarms Alarms
Manual mode Manual mode
Off from BMS Off from BMS
Off from Sched. Off from Sched.
Tab. 5.h
UNIT STATUS
Message Description
Production …Kg/h/(lb/h) Instant production in kg/h (lb/h)
Drain Drain
Init Initialisation
Fill Filling
Autotest Autotest
Waiting (.. min) Waiting (.. min) to restart
Disabled Disabled
Tab. 5.b
Request Meaning Control type
On/-- On= request
--- = no request
On/Off
0 to 100 % Request percentage
%
Ext. regulator
rH%: Control probe reading in rH% rH% probe
°C Control probe reading in °C T probe
Tab. 5.c
Unit status/ active actuators Meaning
Production
Fill
Drain
Water present
Stop transducer control
Malfunction
Tab. 5.d
Note: the control type is selectable in user menu F, under screen Fa01:
Regulation. See the parameter table.