3-10 9G3886_en 2011-03-31
Maintenance and Troubleshooting
154 20154 MCS: Internal
Communications Failure
Restart the laser imager. See page 2-4.
If the error persists, call for service.
155 20155 Incompatible MCS Printer
Configuration for Hardware
Restart the laser imager. See page 2-4.
If the error persists, call for service.
156 20156 Incompatible Software
Versions Installed
Restart the laser imager. See page 2-4.
If the error persists, call for service.
209 20209 Laser Imager Opened
During Self Test
Close the cover.
Restart the laser imager. See page 2-4.
If the error persists, call for service.
449 20449 none Change the charcoal filter. See “Replacing the filter” on
page 3-2.
550 20550 none Call service for preventive maintenance. See “550 code and
Maintenance symbol” on page 3-3.
700 20700 none The laser imager is inoperable.
If the error persists, call for service.
701 20701 none Close the cover.
704 20704 none The network connection to the laser imager has been lost.
Restart the laser imager.
705 20705 none The laser imager is restarting (for example, during a software
update). Wait until the restart is complete.
706 20706 none A shutdown that was initiated remotely is complete. Restart the
laser imager.
915 20915 Internal Image Data
Transfer Failed
Restart the laser imager. See page 2-4.
If the error persists, call for service.
919 20919 Internal Image Data Render
Failed
Restart the laser imager. See page 2-4.
If the error persists, call for service.
002 21002 none No action. The error may remain until the film cartridge is
empty. The film cartridge is operating in manual mode and
AIQC is off.
116 21116 Film Jam in Area 1 See “Film jam code 116 / Jam in Area 1” on page 3-15.
Display
Screen
Web
Portal
Web Portal
Message
Action
To Next Page
Loading...
