Maintenance and Troubleshooting
2011-03-31 9G3886_en 3-11
118 21118 Film Supply: Internal
Hardware Failure
If the Pause symbol is on, press it to cover the film cartridge.
When the Pause symbol stops flashing, remove the film
cartridge from the laser imager. Then reinsert the film cartridge
into the laser imager.
If the error persists, call for service.
119 21119 Film Supply: Internal
Hardware Failure
If the Pause symbol is on, press it to cover the film cartridge.
When the Pause symbol stops flashing, remove the film
cartridge from the laser imager. Then reinsert the film cartridge
into the laser imager.
If the error persists, call for service.
125 21125 Film Supply: Internal
Hardware Failure
If the Pause symbol is on, press it to cover the film cartridge.
When the Pause symbol stops flashing, remove the film
cartridge from the laser imager. Then reinsert the film cartridge
into the laser imager.
If the error persists, call for service.
139 21139 Film Supply: Unable to
Identify Film Cartridge
If the Pause symbol is on, press it to cover the film cartridge.
When the Pause symbol stops flashing, remove the film
cartridge from the laser imager. Insert a different film cartridge
into the laser imager.
If the error persists, call for service.
145 21145 Film Supply: Unsupported
Film Type
The laser imager does not support the loaded film type. Install
a cartridge with a supported film type.
If the error persists, call for service.
146 21146 Film Supply: Unsupported
Film Size
The laser imager does not support the loaded film size. Install a
cartridge with a supported size.
If the error persists, call for service.
175 21175 Rollback Failed to Engage
Cartridge
If the Pause symbol is on, press it to cover the film cartridge.
When the Pause symbol stops flashing, remove the film
cartridge from the laser imager. Insert a different film cartridge
into the laser imager.
If the error persists, call for service.
177 21177 Film Cartridge Failed to
Close
Open the film supply. Manually close the film cartridge, using
the manual rollback knob, to prevent the film from fogging. See
page 3-15.
If the error persists, call for service.
Display
Screen
Web
Portal
Web Portal
Message
Action
To Next Page
Loading...
