Maintenance and Troubleshooting
2011-03-31 9G3886_en 3-13
607 27607 Optics: Calibration Failed Restart the laser imager. See page 2-4.
If the error persists, call for service.
611 27611 Optics: Internal Hardware
Failure
Restart the laser imager. See page 2-4.
If the error persists, call for service.
646 27646 Optics: Internal Hardware
Failure
Restart the laser imager. See page 2-4.
If the error persists, call for service.
650 27650 Optics: Internal Hardware
Failure
Restart the laser imager. See page 2-4.
If the error persists, call for service.
501 28501 Processor: Internal
Hardware Failure
Restart the laser imager. See page 2-4.
If the error persists, call for service.
509 28509 Processor Warm-up Failure Restart the laser imager. See page 2-4.
If the error persists, call for service.
510 28510 Processor: Internal
Hardware Failure
Restart the laser imager. See page 2-4.
If the error persists, call for service.
551 28551 Processor Heater Failure Restart the laser imager. See page 2-4.
If the error persists, call for service.
554 28554 Processor Over
Temperature
Restart the laser imager. See page 2-4.
If the error persists, call for service.
924 29924 Densitometer: Internal
Diagnostic Failure
Restart the laser imager. See page 2-4.
If the error persists, call for service.
925 29925 Densitometer: Internal
Diagnostic Failure
Restart the laser imager. See page 2-4.
If the error persists, call for service.
931 29931 Densitometer: Internal
Communications Failure
Restart the laser imager. See page 2-4.
If the error persists, call for service.
935 36935 Local Panel: No
Communications from MCS
Restart the laser imager. See page 2-4.
If the error persists, call for service.
Display
Screen
Web
Portal
Web Portal
Message
Action
To Next Page
Loading...
