lb-05046-03-EN Pag.32 22/01/2014
MACHINE PARAMETERS
PLEASE NOTE :
some of the following parameters may not be displayed depending to the machine configuration previously
programmed.
Language
+ / -
Enter
English
Enter
Serial
Disable
+ / -
I/O Hartwall
I/O 9600
RM5 Coin box
For I/O 18 - 26 Relais
or PC cable 1200 Baud rate
For PC cable 9600 Baud rate
Decimal price and scale factor price
must be set
In dose program menu will be activated
the relevant parameters
Enter
Esc
MDB
DEVICE
Grounds Numbers
60
+ / -
Variable Value : 0 to 100
Enter
Enter
Recive time-out
0,500 m.sec
Enter
0.020 msec. / 5 000 msec+ / -
Enter
Esc
Esc
System manager
- Machine configuration
- System clock programming
- Display regulation
-Service
- Smart card manager
- Change password
- Group manual movements
- Test actuactors
- Boiler draining
- Alarm history
- Preset configuration data
- System backup
Machine parameter
+
-
German
French
Dutch
Japanese
Italian
Polish
Norwegian
Danish
Waiting time
Coffee dose A-B
Xx min.
Enter
Additional coffee water
Xx ml.
2ml.
+ / -
10min.
+ / -
0-60min.
1-50ml.
With these two parameters it is possible to set an
additional water amount for the first coffee
dispensed after a settable time out (default
values are respectively 10minutes and 2ml).
Time out starts after a coffee dispensing, a group
rinsing or cleaning cycle.
To Next Page
Loading...
