6540 Series Operations Manual Rev_I 1/12/2016 29
Power Failure
The chamber continually maintains the progress of a test in non-volatile memory. In the event of a power
failure or turning the unit off during a test, this information is preserved. Upon restoring power, the operator
is alerted that the power failure occurring before the test was completed and can resume the test (see below).
A test is considered complete when it has been acknowledged.
Pressing the OK button immediately resumes the test. If the operator wants to resume the test but at a later
time, the test can manually be paused (see Running a Test).
Pressing the Cancel button aborts the test and returns to the main screen.
To Next Page
Loading...
