Carrier AquaForce 30XB series - Page 32

32
4.5 - Electrical data (continued)
30XBP from 1100 to 1500
30XBP 1100 1200 1300 1400 1500
Power circuit supply
Nominal voltage V-ph-Hz 400-3-50
Voltage range V 360-440
Control circuit supply 24 V via internal transformer
Maximum operating input power
(1)
Standard unit
Circuit 1
(a)
kW 154 164 201 211 230
Circuit 2
(a)
kW 214 234 210 229 230
Option 081 kW 368 397 411 439 460
Unit + option 15LS
Circuit 1
(a)
kW 145 157 193 200 219
Circuit 2
(a)
kW 200 220 199 215 216
Option 081 kW 348 380 397 419 439
Power factor at maximum power
(1)
Standard unit
Displacement Power Factor (Cos Phi) 0,88 0,88 0,88 0,88 0,88
Unit + option 15LS
Displacement Power Factor (Cos Phi) 0,86 0,87 0,87 0,86 0,86
Nominal operating current draw
(2)
Standard unit
Circuit 1
(a)
A 251 267 331 346 379
Circuit 2
(a)
A 349 381 346 376 379
Option 081 A 600 648 677 722 758
Unit + option 15LS
Circuit 1
(a)
A 244 260 321 336 368
Circuit 2
(a)
A 335 363 330 360 361
Option 081 A 584 630 657 702 736
Maximum operating current draw (Un)
(1)
Standard unit
Circuit 1
(a)
A 313 359 430 460 498
Circuit 2
(a)
A 457 498 460 495 498
Option 081 A 772 859 892 957 998
Unit + option 15LS
Circuit 1
(a)
A 306 352 420 450 487
Circuit 2
(a)
A 448 487 450 485 487
Option 081 A 584 630 657 702 736
(1) Values obtained at unit continuous maximum operating conditions (data given on the unit nameplate)
(2) Operating current of the smallest compressor(s) + fan current + locked rotor current or reduced start-up current of the largest compressor.
(a) When the machines are equipped with two power supplies, circuit 1 supplies the refrigerant circuit A and circuit 2 supplies the refrigerant circuit B or for units 30XBP1550
to 1700 units: Circuit 1 supplies circuits A and B, circuit 2 supplies circuits C and D.
4 - PHYSICAL AND ELECTRICAL DATA FOR 30XB UNITS