Installation and Programming Guide 111
Programming Instructions for UltraSync
Pre-conditions
1. At least one user has been given a username and PIN code (see "Programming
Instructions for Users" on page 87).
2. Aritech Reliance XR is connected to internet and has been allocated an IP address (see
"Programming Instructions for Communicator" on page 107, IP Config).
Notes:
UltraSync provides a secure VPN connection to your Aritech Reliance XR system over the
internet. You will need to provide your Aritech Reliance XR serial number, Web Access
Passcode, and a valid Username and PIN code that exists in your Aritech Reliance XR
system. These codes provide multiple levels of security for the connection.
The Web Access Passcode is needed for:
• web console over the internet via a secure VPN
• UltraSync+ app
• DLX900 software connecting over IP, in addition to Download Access Code
The Web Access Passcode is NOT needed for:
• email services
• web console over a local LAN connection
Once UltraSync is set up, you may connect to your Aritech Reliance XR system using the
UltraSync+ app on your smartphone or tablet. This may require a separate account and
downloading additional software. See further instructions in the User Manual.
Instructions
1. Go to Menu 6 – Communicator, 3 - IP Config.
To Next Page
Loading...
