Carrier Aritech Reliance XR Pro - General Features

12 Installation and Programming Guide
General features
Code combinations
Aritech Reliance XR Pro
Aritech Reliance XR
From 10,000 (4 digits) to 100,000,000 (8 digits)
From 10,000 (4 digits) to 100,000,000 (8 digits)
Maximum user number:
Aritech Reliance XR Pro
Aritech Reliance XR
256
40
User Permissions
128
Onboard zones
Aritech Reliance XR Pro
Aritech Reliance XR
8 (default); 16 if zone doubling enabled.
4 (default); 8 if zone doubling enabled.
Maximum zone number:
Aritech Reliance XR Pro
Aritech Reliance XR
176
24
Additional inputs
Aritech Reliance XR Pro
Aritech Reliance XR
1: box tamper
1: box tamper
End-of-line resistor
820 Ω (2-wire smoke)
3.3 kΩ, 4.1 kΩ, 4.7 kΩ (alarm)
3.74 kΩ, 6.98 kΩ (zone doubling)
Onboard outputs:
Aritech Reliance XR Pro
Aritech Reliance XR
4 programmable outputs, bell, and smoke
3 programmable outputs, and bell
Maximum output number
32
Maximum action number
256, main panel supports 32 actions, each output module adds 32
actions, seven output modules will provide a maximum of 256
actions
Areas:
Aritech Reliance XR Pro
Aritech Reliance XR
8
4
Maximum keypad
Aritech Reliance XR Pro
Aritech Reliance XR
24
16
Maximum expander modules (incl keypads
and tablets)
32
Non-volatile Memory
Event log capacity
Data retention (log, program settings)
1024
10 years
Ethernet connection (IP only)
Supported standard
Speed
Duplex
Cabling
IEEE 802.3u
10BASE-T or 100BASE-TX
Half-duplex and full-duplex
FTP (foiled twisted pair) Cat 5e cable or better
Aritech Reliance XR bus
Type
Capacity
Range
Recommended Cable
4 wire RS485 bus
High common mode tolerance (25V)
Up to 32 devices
800m
Belden 7201A, 3107A, 9842, or exact equivalent 2 pair twisted
shielded cable designed for RS485 (see "
Cable Requirements" on page 26)