Carrier Aritech Reliance XR Pro - Programming Instructions for Outputs

128 Installation and Programming Guide
Instructions
1. Open Scenes.
2. Select Event Type and the Area.
3. Select the Schedule that will determine when this Scene is active.
4. Now program the sequence of actions that you want to happen.
Example
When Exit Delay 1 is running in the Office Area, set Camera 1 to start recording.
Programming Instructions for Outputs
Goal
Turn an output on or off according to an Action.
Pre-conditions
Program the Action and any associated components.
Event 1
Event 2
Event 3
Event 4
Action
State
and
or
=
Action
Result
and
or
and
or
+