30 Installation and Programming Guide
3. User
4. Options
5. Scene
3. Tablet Keypads
1. Name
2. Serial Number
3. Area Group
4. Keypad Options
3. Select the category and type. For example, to remove a keypad touch System Devices -
Keypad.
4. Touch Device UID (Serial).
5. Touch the serial number displayed.
6. Touch Clear.
7. Touch OK.
8. The device has now been removed.
Deleting devices can also be done:
• Using the Aritech Reliance XR Web Server: click the Advanced Menu, click Devices,
find the device to be removed, delete the serial number, click Save.
• Using DLX900: click Devices – Device Info, select the device, then click “Remove
Device”.
Defaulting Panel
Panel can be reset to factory settings by performing the steps below. This will delete all
programming including enrolled devices, users, and panel settings. An authorized installer
PIN is required.
Panel can be defaulted using an NXG-1820 keypad:
1. Tap MENU.
2. Enter installer PIN.
3. Tap Program.
4. Tap Default.
5. Tap All.
To Next Page
Loading...
