Carrier Aritech Reliance XR Pro - Page 115

Installation and Programming Guide 115
Next Channel must be a higher value than the current Channel Number. Circular loops are
not permitted.
Take note of the Sequence Attempts under Communicator – System Event Reporting
(6.11.2). This is the number of times Aritech Reliance XR will attempt the sequence of
Channels you set up in this section.
Channel set up for push notifications is automatically performed by the UltraSync+ app
when required. The panel will assign the next available channel and matching event list
number. No configuration via the web pages or DLX900 is required.
Programming Sequence
Instructions
1. Go to Channels.
5. Channels
18. Channel Groups
18. Channel Groups
6. Communicator
- General Options
- IP Configuration
- Cellular Configuration
- Username
- Password
- APN
- Remote Access
- System Event Reporting
17. Event Lists
6. Communicator
17. Event Lists