130 Installation and Programming Guide
This functionality is achieved by going to that Schedule and selecting Follow Action
Number.
Take care when combining multiple schedules and actions as troubleshooting can get
confusing. Always check and test functionality a single step at a time. Users and Zones can
have multiple levels of permissions, be sure to check that each permission level is always
appropriate.
Example
When a certain user is in the building, we can prevent an automatic Arm-Disarm from
occurring.
First program an Action with the conditions you want and the Duration of the Action if
necessary.
Next program Arm-Disarm with a User and Schedule.
Then set the Schedule to Follow Action Number.
When the action events are met, then the Schedule will become active and will be able to
perform an Arm-Disarm at the appropriate time. If the conditions are not met, then the
Arm-Disarm will never occur.
To Next Page
Loading...
