Installation and Programming Guide 89
8. You can set the start/end date and time for when this user will have access to the
system. This can be used to provide temporary user access. If Active is selected on the
previous tab, then the end date and time on this screen will be set to maximum.
9. You can program up to 4 levels of access for each user. Permission 1 is applied when
Schedule 1 is true.
The combination of one Permission and one Schedule is called a “Permission Profile”
(left drop-down menu). Permission Profile 1 is the highest level and will override
Permission Profile 2 when Schedule 1 is active. Refer to Aritech Reliance XR Reference
Guide for more details.
To enable Permission Profiles the user type must be first set to Custom on the Main tab.
To Next Page
Loading...
