Carrier VECTOR 6500 - Changing Intellisets - Without the = Key Enabled

62-11389
3−28
3.17.2 Changing IntelliSets - Without the = Key Enabled.
COOL DEFROST ALARM START‐STOP
ALARM LIST
SELECT
MANUAL
DEFROST
HEAT CONTINUOUS
PRESS ↑ ↓ TO VIEW INTELLISETS
1. Press the SELECT key until MessageCenter displays
“PRESS ↑↓ TO VIEW INTELLISETS”.
2. When the UP ARROW key is pressed, the IntelliSet List
will scroll up, beginning at the bottom. When the DOWN
ARROW key is pressed, the IntelliSet List will scroll
down, beginning at the top. The current IntelliSet will
have either “ACTIVE” or “MODIFIED” to the right of the
name.
3. Bring the IntelliSet you wish to use into the MessageCenter
and then press the = key. The selected IntelliSet will now be-
come active.
START‐STOP/
CONTINUOUS
SETPOINT
BOX TEMPERATURE
+36.5 F
+34.0