CARVIN XDrive DCM2000Lx - Input Settings Configuration; Input Settings Load;Save and Selection; Input Graphic EQ Adjustment; Input Copy;Paste and Reset to Flat

6.B INPUT SETTINGS
(top 1/3 of screen, after SYSTEM)
6.B.1 LOAD/SAVE
Load preset input settings or save them to your computer.
6.B.2 INPUT SELECT
A, B, (C, D) buttons select and display Graphic EQ settings for each Input.
6.B.3 COPY/PASTE
Copy output settings from one output to another.
6.B.4 RESET TO FLAT
Set all GEQ frequency bands to flat “0” for the selected Input.
6.B.5 GRAPHIC EQs
Hold and drag the Graphic EQ faders to boost or cut a frequency band.
21