1
2. KEY PART
▲, ◀
Available keys instead of numeric keys.
▲
Change the set value
Increase the first place value to 1
◀
Change the digit of the set value
Move to the left by 1 place
USAGE : Input the numeral value in TEST, CAL, SET
mode.
ZERO Key Return the display to 0
TARE Key
Use container in weighing.
Current weight is memorized as tare weight.
If you press TARE key in unload condition, Tare setting is
released.
GROSS/NET
KEY
Display gross and net weight by turn.
GROSS lamp on - gross weight
NET lamp on - net weight
In case tare weight is REGISTERED, tare and item's total
weight is G. weight and only item's weight is N. weight.
* KEY
▣ Total Print KEY.
→ In case of F09 : 1
▣ Hold KEY.
→ In case of F09 : 2
PRINT KEY
PRINT Key
- Total Print key
(by pressing "PRINT" key more than 3 second.)
ENTER KEY
▣ In CALIBRATION, TEST, SET mode.
: Store current condition and exit.
To Next Page
Loading...
