21
CALIBRATION MODE
1. HOW TO ENTER
Turn on the power while pressing the CAL switch on the rear panel
of the indicator and CAL mode starts.
2. AVAILABLE KEYS
▲
Increase the first place set value to 1
◀
Move to the left by 1 place of the set value.
PRINT
(kg/lb version)
‘*’
(kg only version))
Initial('0') of the set value.
ENTER Move into next menu. (CI-2001A)
LIGHT
Move into next menu. (CI-2001B)
3. CALIBRATION MENU (CAL 1 ~ CAL 5)
CAL 1 Maximum Capacity
CAL 2 Minimum Division
CAL 3 Setting Weight
CAL 4 Zero Calibration
CAL 5 Span Calibration
To Next Page
Loading...
