8
FRONT PANEL DESCRIPTION
1. Display Part Lamp
lamp: ON when the weight is stable.
ZERO lamp: ON when the current weight is 0kg.
GROSS lamp: ON when the weight is the total weight.
NET lamp: ON when the weight is the pure weight.
TARE lamp: ON when the tare weight is stored.
PRINT lamp: ON when any data is printed.
HOLD lamp: ON when you weigh the moving object.
BAT lamp: In case of using rechargeable battery, it is displayed the battery
recharging time.
POWER lamp: ON when it is connected to power.
lamp: ON when the current weight exceeds normal weight.
lamp: ON with alert when the current weight is normal.
lamp: ON when the current weight is 90 - 100% of normal weight.
lamp: ON when the current weight is 80 - 90% of normal weight.
lamp: ON when the current weight is below 80% of normal weight.
To Next Page
Loading...
