CAS CI-502A - Weighing Mode

`
26
Weighing Mode
(1) Zero Compensation
Display or Key Used Scale Description
1
st
Step
Empty Change in Zero
2
nd
Step
☞
3
rd
Step
Empty
Zero Compensation has been
performed. In other words, the
current weight is designated as
‘0’Kg.
Note 1. The possible operating range of the Zero key is from ±2% ~±100% of the maximum
weight. The operating range of the Zero key can be designated in F11 of the Set Mode.
Note 2. You can specify in F10 of the set mode to only perform Zero Compensation when the
current weight is stable or if it is possible to perform Zero Compensation when the
weight is unstable.
(2) Select Net Weight / Gross Weight
Display or Key Used Scale Description
1
st
Step
Container
Tare : 5.00 kg
2
nd
Step
☞ or
3
rd
Step
Container
Tare lamp is on to indicate that
the tare has been registered by
the indicator.
4
th
Step
Container +
Item
Net Weight (weight of the item):
13.00 kg