`
17
Rear Panel Descriptions
■ PRT : Serial Printer Interface
■ C/L : Use when connecting an external indicator (Current Loop)
■ INPUT : External relay Input(4 EA) – Use for remote control
(Refer to F50 of the Set Mode)
■ OUPUT: External relay Output (6 EA)
■ RS-232C : RS-232C Serial interface
■ Fuse: Input Fuse (Fuse Capacity: T6A L250V )
■ LOAD CELL :: Load Cell Connection Port (6-wired type)
■ OPTION :: BCD Input, BCD Output, Analog Output (4~20mA or 0~10V), RS-422/RS-485
■ POWER S/W:: Power Switch
For a precise measurement, it is recommended that you use the indicator 'CI-502A/505A'
approximately 10 minutes after powering on.
To Next Page
Loading...
