CAL 5(Zero & Span Adjustment)
Zero Adjustment
Setting Method Display Part
= Set, =Cancel
Set the Zero after affirming stability of
AD value
(Zero is changed with reference to the
current AD)
Span Adjustment
Setting Method Display Part
Using numeric keys ~
,
Enter the desired factor value for change.
= Set, =Cancel
CAL 6(Direct(Equivalent input) Weight Setting)
Setting Method Display Part
Using numeric keys
~
,
Enter the output value.
= Set, =Cancel
Note 1. Find zero, span output of the load cell for equivalent input.
Note 2. Set maximum weight and minimum division for CAL-1 before equivalent input.
32
To Next Page
Loading...
