Weight Markdown
Select “Yes” to display both of original weight and the
discounted weight if any. Otherwise, select No.
Quantity Markdown
Select “Yes” to display both of original quantity and the
discounted quantity if any. Otherwise, select No.
1. Select Yes or No by using 1 or 0 key
2. After setting all of above MARK DOWN sub-menus use “X/ESC” key
or “SAVE” key to go back to PRINT Main menu.
2.9.3 Printer Hardware (Menu code 1730)
( MENU → 7. Print → 1. Printer Hardware )
This section is to explain how to set printing H/W environments in the
following table.
▶ Printer Hardware Sub-Menu
Select label, ticket or continuous label mode.
Label / Ticket Size
If it is Label mode, “Width(60)”, “Height(40)” and
“Gap length(2)” size is set.
If it is Ticket mode, “Width(60)”, “Feed(20)” and
To Next Page
Loading...
