CAS CL-3000 Series - Label Preprint (Menu Code 1737); Adjust Reverse Feed Length (Menu Code 1738)

121
2.9.3.7 Label Preprint (Menu code 1737)
( MENU → 7. Print → 3. Printer Hardware → 7. Label Preprint )
Enter “Y(Yes)” or “N(No)” to select Preprint mode and any value of the preprint
length from “0 mm” to “10 mm”.
Press “TEST” to test preprinting.
2.9.3.8 Adjust Reverse Feed Length (Menu code 1738)
( MENU → 7. Print → 3. Printer Hardware → 8. Adjust Reverse Feed
Length )
Enter any value of the reverse feed
alignment from “0” to “400”.
After setting all of above H/W setting
submenus use “X/ESC” key to go back to
PRINT main menu