CAS CL-3000 Series - Firmware Version (Menu Code 1867)

140
▶ Printer Sensor Test Items
No
Test Items
Description
1
Peel-off
To test that peel-off sensor is properly work.
2
Head-up
To test that TPH is opened or not
3
Gap
To show real time Gap sensor’s value.
4
Peel
To show real time peel off sensor’s value.
5
Temp
To show TPH’s temperature value.
2.10.6.6 Firmware Version (Menu code 1867)
( MENU → 8. SCALE CONFIG → 6. Test → 7. Firmware Version )
You can check firmware version of
the scale.