3.16 How to Change Origin
Note: - To use ORIGIN key, you have to set this key in menu 1880 of program
mode. (See chapter 2.14.8)
3.17 How to Change PLU Type
Note: If you set “TYPE” to “Y” in menu 1873 of program mode changed
PLU type is saved. (See chapter 2.14.7)
① Press “WT/CT” key to change PLU type
from By-weight to By-count PLU
or vice versa.
☞ If you change by-Weight PLU to by-count PLU, quantity is set 1 and unit
price is same.
☞ If you change by-count PLU to by-weight PLU, unit price is same.
☞ If there is discount information on PLU, you can not change PLU type.
② Press ORIGIN key to retrieve one of
origin data saved.
To Next Page
Loading...
