CAS CL-3000 Series - 2.2.7.2 Delete Tare

64
EX) Delete tare no. 1
Note: There is no confirmation request when deleting a Tare No. Pressing
the PRINT key will cause the Tare No. entered to be deleted.
2.2.7.3 Tare Key (Menu code 1274)
( MENU → 2. PLU Data Table I → 7. Tare→ 4. Tare Key )
This menu allows you to assign the Tare No.'s (Menu 1271) to Tare Keys. Tare Keys
must be programmed using Menu 1881 Function Key Define. There is a maximum of 9
Tare Function Keys available.
Note: When Special Function Keys are programmed they take the place of PLU
Speed Keys, reducing the number of Speed Keys accordingly.
1. Enter tare Key.
EX) Tare Key = 1
2. Enter tare number
• Tare Keys are 1 to 9 only.
EX) Tare No = 1