CAS CL-3000 Series - 2.9.3.3 Sensor Calibration; 2.9.3.4 Sensor & Motor

119
• When “Ticket Mode” is in “Print Mode”, [Peel-off] and [Label Paper] do not work.
2.9.3.5 Print Intensity (Menu code 1735)
( MENU → 7. Print → 3. Printer Hardware → 5. Print Intensity )
Enter any value from “0” to “20”.
Press “TEST” to test printing a label.
2.9.3.6 Adjust Feed Length (Menu code 1736)