EX) Delete unit symbol 1.
Note: There is no confirmation request when deleting a Unit Symbol No. Pressing the
PRINT key will cause the Unit Symbol No. entered to be deleted.
2.3 Programming PLU Data Table II
2.3.1 Ingredient (Menu code 1310)
( MENU → 3. PLU Data Table II → 1. Ingredient )
2.3.1.1 New/Edit Ingredient (Menu code 1311)
( MENU → 3. PLU Data Table II → 1. Ingredient → 1. New/Edit )
◆ You can press the SAVE key at anytime to save the current data and if
you want to exit without saving, press the ESC key.
1. Enter ingredient number.
• This value can be from 1 to 1000.
EX) Qty Unit No. = 1
2. Enter ingredient
EX) Ingredient Line1 = SALT
EX) To print “SUGAR” on next line,
enter “ ” after SALT.
To Next Page
Loading...
