CAS CL-3000 Series - 2.10.6 Test

138
2.10.6.1 Display Test (Menu code 1861)
( MENU → 8. SCALE CONFIG → 6. Test → 1. Display )
To test the display, press “1” on Test menu screen. It automatically tests
it. You can exit from testing, by pressing “X/ESC” key.
2.10.6.2 A/D Test (Menu code 1862)
( MENU → 8. SCALE CONFIG → 6. Test → 2. A/D )
To test the A/D, press “2”
To set zero press “ZERO”
User may exit from this menu, using “X/ESC” key
2.10.6.3 Keyboard Test (Menu code 1863)
( MENU → 8. SCALE CONFIG → 6. Test → 3. Keyboard )
To test keyboard, press “3” Display will
show grid point Press any key to test key pad.
To exit keyboard test, press “ESC” two times.