2.7.3.2 Edit Scroll Message (Menu Code 1432)
( MENU → 4. Store Data Table → 3. Scroll Message → 2. Edit Scroll Message )
This Menu allows you to program the actual information that will be in the Scrolling
Message. You may input up to 9 messages and use two different scrolling effects.
1. Enter Message No. and Message Text
• Enter Message No. and Message Text.
EX) Message No. = 1 EX) Message Text = Scale Mart
2. Set Speed
• Speed means the scrolling/blinking
speed.=> for the text speed is representing
the moving speed of the text, and when it is
blinking speed, it represents the speed of the
blinking. User may set it from 1 to 99.
(unit = 0.1m/s)
EX) SPEED = 10
3. Input Blink Counts
• User may input up to 9 blinks.
This is setting for how many time the blink
to blink.
Please input blink counts.
EX) Blink Count = 0
To Next Page
Loading...
