CAS CL-3000 Series - Backup to USB Memory (Menu Code 1877); Restore from USB Memory (Menu Code 1878)

143
2.10.7.1 Backup to USB Memory (Menu code 1877)
( MENU → 8. SCALE CONFIG → 7. Scale Parameter →
7. Backup to USB Memory )
After connecting to USB, Select Yes or No
by using “1” or “0” key.
If you press “1” key in “Backup to USB”
menu, backup file(*.dat) going to be created
in USB.
If file already exists, data will be overwritten.
2.10.7.2 Restore from USB Memory (Menu code 1878)
( MENU → 8. SCALE CONFIG → 7. Scale Parameter →
8. Restore from USB Memory )
After connecting to USB, Select Yes or No
by using “1” or “0” key.
If you press “1” key in “Restore from USB”
menu, Backup data(in USB) overwrite
to scale data.
After this process, Scale will be restarted.