CAS CL-3000 Series - PLU Programming

30
2.1 PLU Programming
You can set 39 items for a PLU as below table and if you do not want to use
some items, you can prohibit those items in menu code:1144.
No
DISPLAY
Description
1
DEPT
Department No.
2
PLU
PLU No.
3
TYPE
Select PLU type among By Weight, By Count or By-PCS
4
NAME1
Enter name 1 of item. Maximum 40 characters.
5
NAME2
Enter name 2 of item. Maximum 40 characters.
6
NAME3
Enter name 3 of item. Maximum 40 characters.
7
GROUP
Select group number. This value can be from 0 to 99.
8
E.BAR
Ext.Barcode
13 digits of EAN-13 barcode is used to output them as they are
9
LABEL
Label No.
(0~99) (0=Do not use Label No.), Label Formats “1~30”.
If Global Setting is YES, it is not shown.
10
LABEL2
(0~99) (0=Do not use Label No.), Label2 Formats “1~30”. This function
prints aux. label as saved number of label number
11
ORIGIN
Origin No. (0~500)
0=Do not use origin.
12
*F.WT
Fixed Weight. The weight is fixed regardless of item
13
PREFIX
Enter serial code for PLU
14
CODE
Item code
15
F.PRICE
Fixed Price. You can set whether use Fixed Price or not
16
☆ PCS
Pieces. (0-999) Set the number for By-PCS PLU
17
☆ SYMBOL
(0~8) Set symbol of PCS or Count
18
PRICE
Unit Price. This value can be from 0 to 999999.
19
S.PRICE
Special Price. It can be unit price by using Special key.
20
TAX
Enter tax number. This value can be from 0 to9
21
*TARE
You can enter tare weight manually or enter No. of tare data. (By-weight
PLU)