20
3.3 Turning Power On/Off
When you turn on scale, display will show 9 ~ 0 for self testing.
During each number and buzzer sound is processing following procedure.
Buzzer On Initial Port,Timer,UART(AD),CPLD,PrinterDriver,RTC
Printer Driver Start
Start Timer
Buzzer Off Flash Check,Set UART (AD) Baudrate
Initial LCD,Display,Key,PS2
LCD “999999” Init Serial, Check Caption Data
LCD “888888” Init ADM,Check Memory Map
LCD “777777” Check Network Parameter,
Load Global Parameter,Load Service Type
LCD “666666” Check Network Flag,CAL mode
LCD “555555”
LCD “444444” Init Ethernet Module
LCD “333333” Init PLU_Data
LCD “222222” Key Error Check -> Buz,Buz : Command Queue Init
LCD “111111” Load Label Default, CheckAdInitStatus
LCD “000000” Check Password,Logging BOOTTIME,NETSTART
To Next Page
Loading...
