CAS CL3500 Series User Manual

19
CAS ELECTRICS CO.,LTD
3) Remove cartridge as fig. 3.
4) Remove Pick- Up Spool assembley and paper guide from the cartridge as fig. 4.
4
5) Place the label in the scale as fig. 5
5
6) Press the FEED key.
NOTE: For auto label calibration press FEED key two or three times
* If label position is not correct, you have to check
* If label position is not correct, you have to check * If label position is not correct, you have to check
* If label position is not correct, you have to check the
the the
the follow
followfollow
followings
ingsings
ings:
::
:
a. Label size
a. Label size a. Label size
a. Label size (Label setting menu)
(Label setting menu)(Label setting menu)
(Label setting menu)
b. Feed Adjustment
b. Feed Adjustment b. Feed Adjustment
b. Feed Adjustment (Feed adjustment menu)
(Feed adjustment menu)(Feed adjustment menu)
(Feed adjustment menu)
c. Senseor calibration
c. Senseor calibrationc. Senseor calibration
c. Senseor calibration (Sensor Calibration m
(Sensor Calibration m(Sensor Calibration m
(Sensor Calibration menu)
enu)enu)
enu)

CAS CL3500 Series Specifications

General

Brand	CAS
Model	CL3500 Series
Category	Scales
Language	English