11
4. Keypad Functions
Keys Specification
0~9 Numeric keys
Decimal point key
C
Use this key to clear out the displayed numeric
readings.
Use this key to exit from setting mode.
ZERO
If there is a minor weight displayed without anything on
the pan, Press the zero key to clear the display.
TARE
Use this key to preset the known tare value when
nothing on the pan.
Use this key to subtract container’s weight.
SMPL Use this key to input sample size.
U.WT
Use this key to input the known unit weight of item to be
counted.
ALARM
Use this key to input the HIGH & LOW weight/quantity
limit for check function.
ADD Use this key to accumulate weight/quantity measured.
TOTAL
Use this key to recall total weight, count & accumulation
times.
REMOTE Use this key to change remote platform.
SET Use this key to enter into User Programming Functions.
ENTER/UNIT
Use this key to confirm the parameter setting.
Use this key to change weighing unit kg/Ib.
MOVE
Use this key to move the parameter value in Set Mode.
Shortcut key of “10” for sampling in counting mode.
MEMORY
Long press to enter into memory mode.
Press this key twice to recall stored information.
GROSS Use this key to display gross weight.
To Next Page
Loading...
Need help?
General
