43
B. Backlight type
Keep pressing ENTER key in USER PROGRAMMING FUNCTION
MODE and release until the following displays appear.
Press MOVE key to revolve the system-preset backlight type
(AUTo – auto.backlight, mManu-manual backlight)
(Default setting : AUTo)
Press CLEAR key to determine and return to normal counting mode or press
ENTER key for determination and move to next.
- Auto. Backlight
Backlight will be going on automatically whenever the scale is loaded by
objects weigh greater then 9 display resolution
or any of keys is pressed.
And it will be going off also automatically approx. 5 seconds after the scale
returns to zero.
- Manual backlight
Press (decimal point) key to switch on and off backlight.
★
Scale will keep the backlight type selected in memory for next use.
★ Turn off the scale to return to normal counting mode.
To Next Page
Loading...
