52
I. Cancel Tare setting
Keep pressing ENTER key in USER PROGRAMMING FUNCTION
MODE and release until the following displays appear.
Press MOVE key to revolve the system-preset Cancel tare mode..
(Default setting : SEriES)
“SEriES” = The tare weight can be canceled continuously.
“onE” = The tare weight must be canceled for one time only.
(Note : If the canceled tare is not the value tared, then the buzzer
will tweet for three times to indicate the error. Remove all the
weight from the pan and then press TARE key or turn off and turn
on the scale to solve the error.)
Press CLEAR key to determine and return to normal counting mode or press
ENTER key for determination and move to next.
★
Turn off the scale to return to normal counting mode.
To Next Page
Loading...
Need help?
General
