5. Variables (The prompt character) used in scale also in label printer
Variable Name Specifications Size
SER Accumulated times (Weight) 2 byte
NWA Net weight (with dot “.”) 7 byte
NWB Net weight (no dot) 6 byte
NWC Net weight (with comma “,”) 7 byte
TWA Tare weight (with dot “.”) 7 byte
TWB Tare weight (no dot) 6 byte
TWC Tare weight (with comma “,”) 7 byte
GWA Gross weight (with dot “.”) 7 byte
GWB Gross weight (no dot) 6 byte
GWC Gross weight (with comma “,”) 7 byte
TNA Total net weight (with dot “.”) 7 byte
TNB Total net weight (no dot) 6 byte
TNC Total net weight (with comma “,”) 7 byte
UWA Unit weight (with dot “.”) 7 byte
UWB Unit weight (no dot) 6 byte
UWC Unit weight (with comma “,”) 7 byte
QUA Quantity (with dot “.”) 7 byte
QUB Quantity (no dot) 6 byte
QUC Quantity (with comma “,”) 7 byte
TQA Total Quantity (with dot “.”) 7 byte
TQB Total Quantity (no dot) 6 byte
TQC Total Quantity (with comma “,”) 7 byte
UNT Weighing Unit 2 byte
AN Address number 3 byte
IN Item number 6 byte
INA Item name 16 byte
Note : 1) Capital Letters are allowed for the Variable Name only.
2) A value “0” will be given when the value exceeds the display range.
To Next Page
Loading...
