CAS WEIGHING SOLUTION NT-200 Series - Percent Mode Sample and Value Input

46
12 – 8. HOW to INPUT the SAMPLE OF
PERCENT MODE
STEP VFD DISPLAY and KEY INPUT PLATFORM DESCRIPTION
1 Press [ZERO] key for 2~3 seconds Empty
2
It’s displayed “Sys”, Enter the percent
mode with [G / N] key
Empty
3 Press [TARE] key for 2~3 seconds
4
It’s displayed “SAMP=Z in=t”,
press [ZERO] key
5
After displaying “SAMPLE” “UnLoAd”
“A/D value”, press ENTER Key and then
after displaying “LoAd” “A/D value”
put the sample on the platform and
press [ENTER] key
Sample
6
Display : “Good” “Per” “0 %”
Using the
key,
input the percent of one sample
Sample
7 Press [ENTER] key Sample
12 – 9. HOW to INPUT the VALUE OF PERCENT MODE
DIRECTLY
STEP VFD DISPLAY and KEY INPUT PLATFORM DESCRIPTION
1 Press [ZERO] key for 2~3 seconds Empty
2
It’s displayed “Sys”, Enter the percent
mode with [G / N] key
3 Press [TARE] key for 2~3 seconds
4
It’s displayed “SAMP=Z in=t”,
press [TARE] key
5
Display : “Good” “00000kg”
Using the
key,
input the weight of 100% sample
Sample
6 Press [ENTER] key Sample