CAS WEIGHING SOLUTION NT-200 Series - Count Mode Sample and Value Input

45
12 – 6. HOW to INPUT the SAMPLE OF
COUNT MODE
STEP VFD DISPLAY and KEY INPUT PLATFORM DESCRIPTION
1 Press [ZERO] key for 2~3 seconds Empty
2
It’s displayed “Sys”, Enter the counter
mode with [G / N] key
3 Press [TARE] key for 2~3 seconds
4
It’s displayed “SAMP=Z in=t”,
press [ZERO] key
5
After displaying “SAMPLE” “UnLoAd”
“A/D value”, press ENTER Key and then
after displaying “LoAd” “A/D value”
put the sample on the platform and
press [ENTER] key
Sample
6 Display : “Good” “nUMbEr” “0 pcs”
7
Using the
key, input the number
Sample
8 Press [ENTER] key Sample
12 – 7. HOW to INPUT the VALUE OF COUNT MODE
DIRECTLY
STEP VFD DISPLAY and KEY INPUT PLATFORM DESCRIPTION
1 Press [ZERO] key for 2~3 seconds Empty
2
It’s displayed “Sys”, Enter the counter
mode with [G / N] key
3 Press [TARE] key for 2~3 seconds
4
It’s displayed “SAMP=Z in=t”,
press [TARE] key
5
Display : “WEiGht” “000kg”
Using the
key,
input the weight of one sample
Sample
6 Press [ENTER] key Sample