39
Snapshot Tutorial
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the (Self-timer) Control Panel option.
3. Use [4] and [6] to select the setting you want and then press [SET].
• The front lamp flashes while the Self-timer countdown is
in progress.
• You can interrupt an ongoing Self-timer countdown by
pressing [SET].
Using the Self-timer (Self-timer)
Setting
REC Screen
Icon Display
Description
10 sec 10-second Self-timer
2 sec
2-second Self-timer
• When shooting under conditions that slow
down the shutter speed, you can use this
setting to prevent image blur due to camera
movement.
×3
(Triple Self-
timer)
Shoots three images: one image 10 seconds
after the shutter button is pressed, and the next
two images as soon as the camera is ready
after shooting the previous image. How long it
takes for the camera to get ready to shoot
depends on the image size and quality settings,
whether or not a memory card is loaded in the
camera, and the flash charge condition.
Off None Turns off the Self-timer.
Front lamp
To Next Page
Loading...
